Thx.

as soon as 100% i´ll seed...

/Cheers

thanks

I´ll se no one with 100%, where are you hynen?

i'm seeding

Great, i´m @ 100% now :-)

Will seed some days, 103 seeders now!!!

10 x THX

/Cheers

Hey, I downloaded it, mounted it and tried to install it but in the middle of install it asks second cd. What should I do since its only 1 cd iso

royalejoller: If you were using the setup.exe file, try to run the acad.msi file, located in the x86 folder, it should work.

(SEED)

how can I download the files ?

hromani: Go to this site: http://filehippo.com/download_utorrent/download/42dcbfe5e78a252a34f1280300315483/ and download uTorrent, install the program, then go back to this site and presss the green "Download This Torrent".

Bum install: Autocad 2009 file D/L'd fine, autocad file has no extention (.bin,.iso,.rar?!) also when install runs, afer entering "666-98989898" serial and installer gets to Autocad portion, it asks for DISK?! Tried burning it as iso, then unpacked as rar file and burn as compilation and still asks for "DISK"... am i doing something wrong here? Using 7zip & InfraRecorder

oh, I'm seeding on bit torrent ;)

I'm an idiot, it's ok... Installed fine, DO NOT use setup.exe, "acad.msi" in the x86 folder is preferred! Sorry for the confusion.

How to turn this file into an iso?

nvm I can burn it now....
But my Vista is 64bit....is there anyway I can install this?

EarMuffs: No. there is not(not that I know of)..you have to download a autocad 64bit version.

please HELP!
I downloaded 100% successfully but when i try to mount it in PowerISO I cannot SAVE. I can only Extract but after that, the location of the extracted file is no where could be found (can't find x86 folder) I cannot work pass Step 2...
I am working with Vista, does this cause the problem?

well, the problem is when i try to mount the file in powerISO, it ask me to 'open' a file...

READ his instructions carefully. Don't just run setup.exe and expect it to work - It won't... This program works fine(as to the comments from several people), and since you are using CAD, I have to assume you are not completely helpless here. Just figure it out like everyone else has. If it's not working, then it's something you are doing incorrectly.

i was looking for autocad 64bit and actually came to a site:

http://lolru.com/share.php

it has 64bit and 32bit :) it worked great for me, with no problems and easy to install :)i would reccomend to anybody to and #1. it works perfect.. :) plus has activation if anybody needs it, just sharing if anybody is looking. :)

I've done this install on XP fine. With Vista 32, I get two blank window errors at the end of the install. The window on the first says "MSI9170" (with blank error) and the second says "MSIF439" (also with blank error). The install completes, then the program wont start without crashing.

If you read the description!

"For Microsoft Windows XP SP2"

that might have something to do with it not working in Vista...

...you think?

Anyone know of a good home design software program torrent? thanks for auto cad will seed when done.

HYNEN: Thank you for sharing!

I have installed autocad but when I try the keygen it says:

"Internal error #6 - please be sure the app is running and on the license screen"

But it is running on the app screen, someone knows how to get through this?

Thanks

Thank you

thanks larryguy67 :) i tried that site and it truly is awesome :) it worked great for me too :)

Downloaded en installed it. Works great, but after the second start it says that my serialnumer isnt correct. :/

Got the solution for this?

is this the program that costs like 4000??

Can someone help me...
I downloaded this torrent, mounted it to iso, but I can't see any folders or files. It's just a blank page file called Autocad 2009?? This has never happened before, I don't understand?

Got a problem, followed the instructions as it says and it installs but when I try to open the program I get this error.

"The application failed to initialize properly (0xc0150004)"

Anyone got the same prob or know a fix?

BlackHawk I did exactly what you say in steps 1 and 2 but I can't get any furtherer because CAD has not installed properly.

This is the error, "This application has failed to start because the application configuration is incorrect." I have tried uninstalling and reinstalling but to no success.

Any Ideas? (btw i'm not new to computers and programs that are cracked, so don't just think im being a noob please. :D)

HELP!!
I downloaded this torrent, mounted it to iso, but I can't see any folders or files. It's just a blank page icon file called Autocad 2009 :(

alguien me puede decir si funciono o no en su computadora? xq a mi no me ha funcionado ayudame :(

HOULI SHIT!!! THIS FUCKIN PROGRAM COST 4000!!! OMG O.o

I had a lot of errors when I installed this program, it would just shut down on me, I was running the wrong version of Netframework, you need to download Netframework 3.5 for the program to run correctly.

Sorry to be noob-like. But I am having a problem with the activation. When I press Activate Product. The Serial 000-00000000 appears with a request code.

To use the keygen do I use this request code along with any of the serials mentioned( like 666-98989898) to generate the activation code?

I keep getting an Registration-Activation Error message. And it's not working.

Full disclosure, this also happened to me when I was trying to install AutoCAD 2008 on this same computer because I pressed the "Get Activation Code" by mistake while trying to paste the Activation code. Does failing the activation once "mark" my computer so that it wont accept any other activations?

Sorry for the long post, but I'd appreciate any help.

this program cost 80.000

THNX Downssap, after trying 4 different types of acad and 2 weeks of struggling with F%*$ Vista, the download of netware 3,5 did the trick for me!!!

and by netware 3,5 I obviously mean Netframework 3.5

thanx!!!
will seed!

good call on the dotnet
i was getting applicatins errors when starting, they all went away after loading .net 3.5

WTF, i have downloaded it 100% !
and than i run setup.exe completely
than u press acad.msi (or whatever the name is)
than its says i got the wrong system operating....
i got windows vista ultimate novembre release...

is there anyway to turn off auto-updates online? do you need to?

Hi all,
New here and new to using a download manager. I tried Flashget and now Free downloader for this file but I get these errors and don't know what i've done wrong.
Would appreciate some help...hubby needs this prog for his new course and we had NO idea of it's cost :(

9:24:32 PM 1/14/2009 Connecting tracker...
9:24:38 PM 1/14/2009 Response has been received from the tracker successfully.
9:24:38 PM 1/14/2009 Connecting tracker...
9:24:43 PM 1/14/2009 Failed to receive the valid response from the tracker.
9:24:43 PM 1/14/2009 An existing connection was forcibly closed by the remote host.
9:24:43 PM 1/14/2009 Next attempt to connect to tracker in 59 seconds

Please Seed

dst444, i too am curse with VISTA, and got the two error windows. try this: begin the uninstall process, but select REPAIR when AutoCad prompts. worked for me.

I JUST REGISTERED PURELY TO SAY THIS:
THANK FIRST OF ALL GOD - FOR LETTING THIS BE REAl
SECONDLY TO THE GUY WHO UPLOADED THIS
AND TO THE INSTRUCTIONS

I definetly vouch for this torrent it does work, it does not take a genius. just follow the instructions everythin u need is there all u need
is to dl power iso which u can google

if u have any questions on how to install this
just msg me on here

till then ill be seeding

take care guys, and good luck drafting

don't download this stuff it doesn't work it's just a big virus the setup won't even work!!

Hi Trinity23, copy and paste the link below in internet explorer.
http://www.vuze.com/Download.html
This is a torrent handling program called Vuze 9.35meg formerly known as Azureus, install it and make sure that programs Like Norton Internet Security etc allow and do not block connection, also a windows firewall in Control Panel, Network Connections will also slow down the process, if applicable also disable the firewall. Download the torrent using this program, follow the instructions to install it, once installed if running a Windows version of XP or Vista, you will need to download Directx10 and Net Framework 3.5 for the program to work properly, good luck.

I have installed autocad but when I try the keygen it says:

"Internal error #6 - please be sure the app is running and on the license screen"

But it is running on the app screen, does someone know how to get through this?

Hei HYNEN & Norske Seedere !!!
(google translate) :-)
I am new to pirate bay,but not a noobe to installing software like someone already said in these comments.I believe that problem is in me never had to extract this .daa, I`ve used all kind of images mdf,mds ,iso...all kind of cracks and patches keygens but gave me a headache . Especially the fact that your install instruction 1: mount image: ... and then again blackhawk5421 says do not mount...
I have power iso latest ver. and .NET Framework 3.5 and all the things mentioned in comments .
With your inst. it worked for me all till starting the program then it said :"This application has failed to start because the application configuration is incorrect" same like for jimbob938.
So pls. could someone give some more detailed instructions.
I am not seeding this before I get it work properly,with or without someone instructions.So still trying to make it run.If I manage I`ll give detailed instructions.

P.S. I like your responses to those in a legal threat ...polar bears ... good one LOL.
anakata rules.
And sorry if comments is too long.

sorry only a little edit:I believe that problem is in me never had to extract this .daa, I`ve used all kind of images mdf,mds ,iso...all kind of cracks and patches keygens but .DAA gave me a REAL headache.

Caps are for the missing words in my previous comment.
Skål

And yes I say,not seeding this before make it work with or without someone`s help ,only because I don`t want someone to download something from anyone(me included) till I am 100% sure that it works fine.
Sorry for disbelief you guys that say that this works for you,I already said that I also believe that the problem is in me.
So as soon I make it work I am seeding too at least for as twice as big this torrent was.New month for me starts for me on the 7th February,just a few more I must keep ups and downs as less as possible days,don`t have flat rate. I hope I get this work right till then.
I am also new to torrents,used only a filehosting services till last month ,don`t how much one seed means,and with my up speed max up to 256 kbps sometimes up to 300 kbps,funny provider says 256.Sorry again for a long post.
Sanha out.

Well here I go again.

This is unfuckin`believable I just did it right ,and I know I told if make it I will give detailed "how to install" but pls don`t ask even I don`t know how I did it this time.In fact I did it all as the first time as instructed for this torrent(no extractings like blackhawk5421) in 9 steps,only between these two attempts I tried to uninstall from add and remove programs and then it ask me if want to try to reinstal ,I did try but nothing again.Then I tried to run the setup.exe on the .daa mounted on virtual drive with Power ISO(I believe other similar programs would do the job(alcohol,ultra ISO)...but stick with this one,works 100%),and then chose some of the install options Meterials library and crap after it has installed it self for a while it stoped to ask for the other DVD...finish ...didnt work 3rd time.Then unmounted everything and all from the begining step 1.2...step 8.9. run the the acad.msi again checked materials library again then checked all the 4 shortcuts(surely doubt that this is the catch but who knows) finshed install like the first time and then run the Auto desk design shortcut first.closed that design thing.and then clicked on the main shortcut and it started .

A few tips more, at least it was so in my case,I used 666-98989898 for serial ,it did let me copy paste nor request code(had to type it into a keygen myself) nor it let me copy paste the generated activation code,typed that by myself too .the keygen will give you 17 times 4 codes but there are only 16 boxes to to type but after you enter 16th code into a box another one will appear and when you type in the 17th code(last one) , another box will appear but ignore that press next and than finish the installing.close the AutoCAD restart it only now you to find out how to run as administrator .In my case OS is Tiny XP platinum edition(best windows ever made better than original one) and it comes with administrator account by default so run as admin didn`t bothered me at all,I also vistamized ,uninstalled previous windowblinds ver 5.1 also was preinstalled with the platinum edition then installed Windowblinds with the patch that changes SiD(big thing,really don`t see why are some people afraid of it) did that just after I reformated ,installed OS and a graphic card driver ,and all other installs I need including this one.

PS seeding in a few days 10 to be more accurate,and yeah as soon as learn how to use AutoCAD find a job and earn +4000 $ I am buying original software,...

just joking :-)

PS PS not joking about buying it if I earn the bloody money I am joking about me being able to save the +4000 $ whatever job in the world I would ever find.Still unemployed :-) So much form Bosnia.

Many greetings to Norske polar bears from sanha the brown bear(ursus arctos)

Novel continues
I just noticed among the links below the search that there is bay forum too so I could put my post somewhere in there but it seems I need to register there too with another name and pass.Don`t have the time right now for that in a future I will,brown bears need to sleep in a winter,hibernate . I didn`t noticed forum link because it looked to me just like the links to crap that is usually placed in the footer you know what I mean licenses and such things "powered buy... this and that".Please don`t band me just delete my extra posts or all of them it is just a 4-5 five clicks for you I would delete all if it were possible cause there is no use of them ,all needed to be said is there in torrent description.

Thanks for the torrent !!!

Never said that, did I ? :shame on me: hope you understand I was a bit pissed off when didn`t wanted to work on the first attempt.Even a thought came,after I installed it properly at the end,that you guys hacked into my comp and helped me to install ,just being a little bit paranoid :-).But I still don`t understand what the hell went wrong the first time I tried to install.

THANKS

Hey Sanha, thanks for the comments, if you gather them all up, you could possibly publish a novel on all the how to?s of this torrent!!!!!

No problem pal.Here`s a another one.But first look at here it will be miuch more clearer for you to see what a hell am I saying here right now.

http://thepiratebay.ee/torrent/3792786/Stardock_Objectdock_Plus_v1.90_FULL

This one will be much shorter I hope.

Much shorter.

I just had to format c:/ today cause I had some problem with net speed and my IP changed every 2-3 minutes probably my lousy network fast ethernet adapter but first I thought I had a virus ,actually I had it but now I am sure it is not that virus I got in a crack , I knew about the virus and that`s one of those harmless that we use almost every day but we are not aware of it cause in these precracked versions of ESETs kaspersky or whatever you use,scan setup comes with the signature boxes unchecked,read the link up there.So I formated my PC,installed the system again and connected just after I installed only graphic card driver and the precracked :) ESET SS to update the virus definition database and crap the net still not working how it should it is still slow as dialup shit approx.5-6 kB/s .Then I installed the Auto CAD again and this time it was a real piece of cake.

Here is the How to finally,and don`t worry keygen for AutoCAD is 100 % clean even with the all of the scan setting turned on, signatures potentially unwanted/unsafe apps etc.

Install the Power ISO first if you don`t have it .

Then set one virtual device and mount the image ,set for `all files` in the file type(extensions .daa .bin .iso. .mdf .mds .etc :) )box, when browsing you PC for image, there is no extension on the image.
When mounted(it takes only a few seconds).
right click on the virtual drive,>explorefinish.Now you have Auto desk design review shortcut already on the desktop.Next thing is to open a mounted image again then go to X86 folder on that virtual disk and now run the acad.msi check the box for material library too,check all four shortcuts(I believe this is not necessary but it didn`t turn out to be unnecessary,so hit it anyway,just for the case) then just clicks on next and it will be finished in a few minutes.
You can read,read me files if want, but no need for that.
Click on the desktop open the Auto CAD choose activate.Doesn`t matter if you`re connected it will first tell that the registration failed ,if using a firewall do not allow AutoCAD to connect,I had firewall and did not allow but registration first failed it seems it must be like that.But that`s only some registration shit not activation yet, probably doesn`t have anything to do with connection and happens before it tries to connect .Then when you get to activation screen you open the key-gen it is in the crack folder on the virtual drive....and I think I already explained the rest in my previous post ......so I am not doing it again this one was "short" enough. :)
enjoy
And a BIG THANKS to AUTHOR of this keygen and GREAT JOB MAN you ought to be payed for this if are not already :) simple to use and the most important it is completely malware free and THANKS for the torrent again.
If you ever read this than I beg you to do the Stardocks activation thing,King do it and you are the King of them all Kings,please. We already have these patches for them but there is still that 0.1% unsure because of these trojans that are not real bad one but just in that case when something else fucks up the system like today in my case ,so that we do not have to doubt on these 99.9% safe patches.Read my post in the link up there in this post and you`ll know what am I talking about.

PS
People be sure that you uninstalled and deleted all the registry entries from previous failed installs if any or your older versions of ACAD do it manualy search for Autodesk and then for AutoCAD use F3 also to find next entry until you clean them all this is also easier if done after you first use URSoft Uninstaller but it also left some(somteimes it doesn`t leave a thing form previous install) entries.When using Your Uninstaller do not reboot after a step 1 if it asks for restart wait for all 3 step so it cleans all or
at least mo

Hey HYNEN,
Do you ( or anyone else), have any ideas if this Autocad 2009 32 bit works on Windows 7 32 bit beta ?
Thanks

WOW unbelievible thank you very much for the instructiones sanha thank you Hynen for the torrent it works great and reagards from Mexico, you have a house here if you wanna come over.
thanks againg for sharing this good stuff

i downloaded this torrent, but when i tried to follow the to do list to get it up and running, the autocad 2009 file turned out to be...
file type- file
so i was unable to do a damn thing with it
any suggestions???

At last I got it to work, thank you for the great download. After installing and entering serial number and all (took a while for me to understand that the "Request code" is the number of letters in the setup window, and is NOT the same as the serial) I got an error message about, something like this:

"Installation incomplete, reinstall immediately."

If you get this, use the setup.exe file and install the extra programs, and when it gets cancelled (because won't accept virtual disc) then go back to install using acad.msi

This worked for me. Using WinXP SP3

THAAAAAAAAAANNNNNNKKKKKKKKSSSSSSSS
sooooo much for the great download it totally works!!!(although i used winrar instead of poweriso and you don't have to mount the image)

@Borreguito , thanks to hynen first !
Also if you you look at his instructions it seems he was not sure how to install this .
1: Mount image: "AUtocad 2009" in PowerIso

2: Open the disk-station(virtual disk) in "My Computer"

3: Run the "setup.exe" file first. Then after it is done and asks for another CD run "acad.msi" from x86 foder .when finshed ...step 4.

4: Run "ACAD 2009"

5: Select Activate the Product when ask for activation. Use 666-98989898 as serial.

6: Open the xforce keygen ("xf-acad9-32-BITS.exe") in the Crack folder in the disk-station in "My Computer".

7: Enter the serial and press generate

8: Copy and paste the activation code.

9: Finaly: restart ACAD 2009.

It's not showing up as a DAA file for me.
I've got poweriso - magiciso - ultraiso - daemon tools - alchohol
But none work - in windows explorer it just says "file" not daa iso or any of the multitude of others.
Bollocksed if I know what to do now FFS
I have done countless virtual image loading but this one isn't an image!
Anyone else got same problem?

Great torrent. Extracted the file with PowerISO and burned a data DVD with Nero burning room.
When I inserted the burned DVD, Autodesk install wizard updated my .netframework and then when it asked for the CD I just closed the wizard and followed the instructions in your "howto" txt file. Worked like a charm!
Thank you!!!

this is for SANHA..... whowww... you are complicate men...

Mounting or not mounting..???

Is simple: unrar or extract to a folder using winrar or poweriso.. (if you whant, you can burned latter)

1: Run the "setup.exe"

1.1: Click "Install Products"
1.2: [ Select product to install ], select only AutoCAD 2009 and press NEXT >
1.3: Select contry or Region and click I Accept. Click NEXT >
1.4: [ Product and User Information ], enter 666-98989898 as serial number and write your favorite data and click NEXT >
1.5: [ Review - Configure - Install ] , click NEXT ( navigate with your own install settings ) and click on "Configuration Complete" button when your finish your selecctions and press "INSTALL"
1.6: Unckeck "reame" and click FINISH

2: Run ACAD2009

2.1: Make shure that "Activate the Product" is selected and press "NEXT"

3: Run KGen.exe in the "crack" folder

3.1: Copy request code from ACAD and paste to KGen and press "Generate"
3.2: Copy Activation code from Kgen and paste to ACAD .. FINISH

thanks to all the comments and notes. just needed to added time and perseverance and i got it working. great download.

Thanks!

tnx for the instructions maits!!! :D

Worked perfectly for me, thank you very much!!

Thank you very much
this works perfecto!!!!!!!!!!!!!!!!

once i get to step 4 it says "I cannot install this product on my current opperating system" PLEASE HELP!

sorry wrong torrent.

when using the keygen it gives me a "request code error" when i try to generate an activation code. i tried putting the serial number in with a dash.... without a dash.... nothing works. any help???

Super torrent, the only way for me was described by nnyerges bij 2009-03-18 04:09 CET, now it works like a charm!!
TYVM you pirate bastards!! keep on seeding... yeah

Request: Carlson Takeoff 2009

Wonderful torrent
works fine
no problem
thankyou

seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
seed
v plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..

stuck at 83%

not downloading after that..... so plzzzz

seed....

..

stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..stuck at 83%

not downloading after that..... so plzzzz

seed....

..

Now trying to download. Based on the comments, I have to say THANKS in advance.

hey i downloaded the file but cant open it its just a unknown file

@leo.mahesh:
Maybe you should try to upload also. People don't like leechers...
At the moment I'm downloading @1000 kB/s and uploading @350 kB/s (about the max. of my connection) > that's where bittorrent is all about: Sharing!!!

The serials doesn't seem to work any more, i've tried them all, 666-98989898, 666-69696969 and 653-123454321.

Any ideas?

WORKS FINE! a bit tricky! wanted 2nd disc to load! just open the file the find the start up prg in side! putin in codes, did`nt want to copy n paste crack/key! type in crack/key then click on paste in code, then it put code in the paste box then press enter! JOB DONE!!
many thanks! ;o)

got my autocad from

smartXlol.com/share.php just delete the "X"

wokred great for me, with activation and fast &speedy download. just sharing

does not run with windows 7!

my PowerISO wont mount over 300MB??

This program will run in Windows 7! The trick is to completely install the program as instructed.

Then go to "computer" + "Uninstall or remove a program" + Find AutoCAD 2009 and uninstall.

The uninstaller will come up with 3 options. Select the repair option. Let the installer do its thing.

When it is done you can now run AutoCAD 2009 in Windows 7. If it comes up asking for a disk, just point it to your x86 folder on your ROM drive and you are good to go! Cheers

works perfect on XP!!! Thx HYNEN and Sanha-svaka cast druze na opsirnom odgovoru :) vidi se da si se bash potrudio da pripomognes onima koji nerazumeju sta je autor vec napisao lol
Pozdrav
Best regards and work with the AutoCad it's very usefull !!!

The keygen doesn't produce much report by VirusTotal.com except two red flags:

http://www.virustotal.com/analisis/c5a5602422c423530df50b1bf73e2084aa49a793b67fdbfb732ba18f2ad2596a-1267504773

good job... it's working..

good job and no problem. thank you...

Instructions in Portuguese:

1: Descompacte a imagem: "AUtocad 2009" com o PowerIso ou o Winrar (ou semelhante)

2: Descompacte o arquivo na pasta "Meu computador" (ou qualquer outra)

3: Na pasta "x86" execute o arquivo: "acad.msi" (Em caso de erro, execute primeiro o "setup.exe". Depois tente executar o "acad.msi" novamente.)

4: Execute "ACAD 2009"

5: Selecione a opção "Activate the Product" quando requisitar a ativação. Use o serial 666-98989898.

6: Abra o xforce keygen ("xf-acad9-32-BITS.exe") na pasta Crack que está onde foi descompactado o arquivo. "Meu Computador" (ou outra)

7: Copie e cole o código de ativação (Activation Code) no programa "xforce keygen" e aperte em gerar. O programa vai gerar um código, copie ele e cole na caixa de diálogo da janela de ativação do AutoCAD e ative.

9: Finalmente, reinicie o AutoCAD 2009.

OBS.: no Windows 7: (tkx Buschy)

O macete é instalar completamente o o programa como as instruções acima.

Vá ao "Painel de Controle" + "Programas e Recursos" e encontre o AutoCAD. Depois clique em "Desinstalar/Alterar".

O Desistalador te virá com 3 opções. Selecione a opção 'repair'. Deixa rolar.

Quando estiver pronto, rode o AutoCAD e pronto!

Se questionado sobre o disco do AutoCAD, só direcionar para a pasta "Meu Computador" (ou outra) e pronto.

couldn't install with poweriso
after mounting the image ,there is no autocad 2009 folder

plz recommend another torrent........

IMMEDIATE ASSISTANCE REQUIRED!!!!

This problem has been brought up but has yet to be answered. When running the keygen, this error (or some variation of it for other people) appears when the serial is imputed to receive the activation code despite the fact that autocad is running.

"Internal error #1 - please be sure the app is running and on the license screen"

Can anyone suggest a method of troubleshooting this error, suggest a different keygen or offer the activation code and serial number that they used?

wat do u mean by STEP 1 & 2 . .i don't know how to use the power iso! plz reply asap

hi! when i downloaded this it is just a FILE type not a ISO or BIN type. .can you plz help me I badly needed this software . .plz reply!

be aware that this is a broken files already ... just try it ... maybe i'm wrong ...

ESTÁ FUNCIONANDO CORRETAMENTE, OBRIGADO

it works just fine, thx

J'ai une collection de logiciels textiles qui fonctionent tres bien. je ss obessede par la mode e jai une collection de logiciels de textile et fashion derniere versions comme gerber accumark, optitex, lectra modaris, geminicad, browz-wear vs-stitcher .. etc. contactez moi si vs voulez bien porur de l`aide sur :

mom email c : softex.fashion@gmail.com

cordialement

i have stylecad 7 and 8 working perfectly with video tut .. contact me at :

softex.fashion @ gmail.com